What standards are needed for the design of power capacitors?

Date of release:2018-11-19 Author: Click:

Power capacitor design requires the following standards:

GB / T 11024.2-2001 shunt capacitors for AC power systems with nominal voltages above 1kV Part 2: durability test

GB / Z 11024.3-2001 shunt capacitors for AC power systems with nominal voltages above 1kV Part 3: protection of shunt capacitors and shunt capacitor banks

GB / T 11024.4-2001 shunt capacitors for AC power systems with nominal voltages above 1kV Part 4: Internal fuses

GB / T 12747.1-2004 self healing shunt capacitors for AC power systems with nominal voltages up to and including 1 kV Part 1: General - performance, testing and rating - Safety requirements - installation and operation guidelines

GB / T 12747.2-2004 self healing shunt capacitors for AC power systems with nominal voltages up to and including 1 kV Part 2: aging test, self healing test and failure test

GB / T 17702.1-1999 power electronic capacitors Part 1: General

GB / T 17702.2-1999 power electronic capacitors Part 2: requirements for fuse isolation test, destruction test, self-healing test and durability test

GB / T 17886.1-1999 non self healing shunt capacitors for a.c. power systems with nominal voltages up to and including 1kV Part 1: General - performance, testing and rating - Safety requirements - installation and operation guidelines

GB/T 17886.2-1999

Non self healing shunt capacitors for a.c. power systems with nominal voltages up to and including 1 kV - Part 2: ageing test and failure test

GB / T 17886.3-1999 non self healing shunt capacitors for a.c. power systems with nominal voltages up to and including 1kV Part 3: Internal fuses

GB / T 22642-2008 aluminum foil for electronic and power capacitor

GB / T 2900.16-1996 Electrotechnical terminology Power Capacitor

GB / T 3984.1-2004 power capacitors for induction heating installations Part 1: General

GB / T 3984.2-2004 power capacitors for induction heating installations Part 2: aging test, damage test and internal fuse isolation requirements

GB / T 6115.2-2002 series capacitors for power system Part 2: protection equipment for series capacitor banks

GB / T 6115.3-2002 series capacitors for power system Part 3: internal fuse

GB / T 6916-2008 wet tropical power capacitor

JB / T 7114-2005 power capacitor product model compilation method

General specification for power capacitor packaging

The address of this article:http://www.diandq.com/en/news/395.html

Key word：Capacitiveload,Reactivepowercompensationandenergystorage

The last one:Power capacitors by purpose
The next one:What are the functions of power capacitors in power grid?

News

Product

News

Contact us